8 and 8 ½ wide flat top race trailers w/ 5200# axles
Available in 18, 20, 22, 24, 26, 28, 30, 32 and 34 foot lengths
Model code example: RCS8.5x28TA3 |
| AXLES & TIRES |
5200# Dexter EZ Lube torsion brake axles (2) |
ST225/75R15D (4) Radial tires |
| FRAME |
6 inch tube main frame
16 inch on center floor cross members
16 inch on center wall posts |
16 inch on center roof bows
Painted and undercoated frame
|
| HITCH & COUPLER |
2 5/16” coupler w/ Safety chains and 3rd member tongue |
Breakaway kit safety system with
7 way round plug for tow vehicle |
| DOORS |
Spring assisted ramp door w/ beavertail
Recessed camlocks on ramp door |
48” camlock door curbside |
| EXTERIOR |
.030 exterior sheet metal
Brite front corners
Cast corners front and rear w/ brite wrap between front cast corners
Brite rear hoop
3 inch lower trim
6 inch extruded top trim |
ATP stone guard 24” tall
One piece aluminum roof
Roof vent
1 pair LED recessed tail/brake lights
LED recessed clearance lights
Approved DOT exterior lighting |
| INTERIOR |
3/4" standard plywood flooring
3/8" plywood interior walls |
White vinyl insulated ceiling
4 – D rings in car position. 9 rope ties shipped loose
3 – 12V dome lights w/ wall switch |
| STANDARD DIMENTIONS |
Interior height 78”
Exterior height 110” (including roof vent)
Exterior widest point 101” |
Inside wall to wall width 90” (8 wides) -
96” (8 ½ wides)
Rear door opening width 84” (8wides) -
90” (8 ½ wides)
Rear door opening height 76” (w/ beavertail) |
Note: Dimensions listed are the same for 8 and 8 ½ wide models unless otherwise noted.
All models in this series have wheel boxes inside unit. The distance between wheel boxes on all models is 81”.
All dimensions based on standard model in this series.
Models with heavier payload capacities and axle configurations are available
Please discuss with dealer any critical dimensions before ordering.
|